You settled on your size years ago. L, or 50, and you have picked the same number automatically ever since. Then a shirt arrives that pulls at the shoulders while hanging loose at the waist. Or a trouser that fits perfectly at the waist and grips through the thigh.
Sizes vary by brand, by country and by garment type. An L at one label is an XL at another. The only way around that is to measure your body properly and compare those numbers against the size chart of the specific product. This guide covers how to take all six measurements correctly, which one leads for each garment, how European, American and British sizing compare, and when alterations are worth paying for.
Which measurements do you need?
You need six body measurements to determine your clothing size completely: chest, waist, hips, shoulder width, sleeve length and inseam. Each one leads for a different category of garment, so knowing all six means you can buy anything with confidence.
"Men who know their measurements buy the wrong thing far less often. Measuring takes five minutes and saves you months of doubt, returns and reordering."
Rick Ros, founder of Neycko Menswear and fit specialist
Which measurement matters where:
- Chest circumference leads for shirts, jackets, blazers, t-shirts and polos.
- Waist circumference leads for trousers and shorts.
- Hip circumference is a check measurement for trousers and swim shorts.
- Shoulder width is the critical check for jackets, blazers and shirts.
- Sleeve length leads for shirts and jackets.
- Inseam leads for trouser length.
How do you take each measurement correctly?
Use a flexible tailor's tape, keep it horizontal, and do not press it into the skin. Breathe out normally before reading the number. Measuring over a thin t-shirt rather than a jumper gives the most usable result, since size charts assume body measurements rather than clothed ones.
Chest
Measure horizontally around the widest part of your chest, just under the armpits and across the shoulder blades. Keep the tape flat and level all the way round. This is the primary measurement for every upper-body garment.
Waist
Measure at the narrowest part of your torso, usually just above the navel. This is the leading measurement for all trousers. Keep the tape horizontal and do not pull it tight. Breathe out normally before reading.
Hips
Measure around the widest part of your hips, typically 20 to 25 cm below the waistband. This is a check measurement. If your hips are proportionally wider than your waist, the hip measurement becomes the leading number for trousers.
Shoulder width
Measure from shoulder seam to shoulder seam across the top of the back. This is the most critical measurement for jackets and blazers. A jacket can be taken in at the sides, but the shoulder seam cannot be corrected without rebuilding the garment.
Sleeve length
Measure from the top of the shoulder, along the outside of the arm with the elbow slightly bent, to the wrist bone. Keep the arm relaxed and lightly bent for the most accurate result. This is the leading measurement for shirts.
Inseam
Measure from the crotch seam to the bottom of the ankle. Stand upright with your feet slightly apart. This is the leading measurement for trouser length. Measuring an existing trouser that fits well is often easier than measuring your leg.
Which measurement leads for which garment?
Not every measurement matters equally for every garment. The table below shows the primary and secondary measurements per garment type, so you know which number to prioritise when they point to different sizes.
| Garment | Primary measurement | Secondary measurement | Note |
| Shirt | Chest | Shoulder width, sleeve length | Shoulder seam cannot be altered |
| T-shirt or polo | Chest | Shoulder width | Check the waist too on slim fits |
| Blazer or jacket | Chest | Shoulder width | Shoulder is the most critical measurement |
| Trousers | Waist | Inseam, hips | Use hips if wider than the waist |
| Shorts or swim shorts | Waist | Hips | Size to the larger of the two |
| Coat | Chest | Shoulder width | Size up if worn over knitwear |
How do you use a size chart correctly?
Always compare your measurements against the size chart of the specific brand you are buying. Sizes are brand-specific guidelines rather than a universal standard, so an L at one label does not correspond to an L at another. Four steps make this reliable.
- Measure your body using all six points above and note everything in centimetres.
- Find the size chart for that exact product, not a generic chart. Manufacturers base their charts on their own patterns and fit.
- Compare measurement to size. If your chest points to M but your shoulders point to L, take the L and check that the chest sits comfortably.
- Size up when in doubt. A garment that is slightly too large can be altered. One that is too small cannot be rescued.
That third step is where most mistakes happen. When two measurements disagree, the one that cannot be altered wins. On a jacket that is the shoulder, every time.
How do European, American and British sizes compare?
European, American and British men's sizes are not directly interchangeable. They use the same body measurements but different reference numbers. European trousers use a single number tied to waist circumference in centimetres, while American and British brands use a W and L system in inches.
| Waist (cm) | EU trouser size | US/UK waist | EU jacket size | Chest (cm) | US/UK jacket |
| 78 to 82 | 46 | W30 | 46 | 88 to 92 | 36 |
| 83 to 87 | 48 | W32 | 48 | 92 to 96 | 38 |
| 88 to 92 | 50 | W34 | 50 | 96 to 100 | 40 |
| 93 to 97 | 52 | W36 | 52 | 100 to 104 | 42 |
| 98 to 103 | 54 | W38 | 54 | 104 to 108 | 44 |
For shirts, the European system uses neck circumference in centimetres, such as 39 or 41, while American and British brands use collar sizes in inches. A European 39 corresponds to roughly 15.5 inches, a 41 to 16 inches and a 43 to 17 inches. Our guide to measuring your collar size covers how to take that measurement, and the different shirt collar types explains which shape suits you.
How do you choose the right fit alongside the right size?
Size and fit are two different things. Size determines whether the garment fits. Fit determines how it hangs and how it looks. Two men with identical measurements but different proportions can experience the same garment completely differently.
The three standard fits in menswear:
- Slim fit follows the body with a closer cut and less surplus fabric, producing a modern silhouette. Our explainer on what slim fit means covers the measurements behind it.
- Regular fit is cut slightly roomier for more freedom of movement. It suits every build and stays classic.
- Loose fit gives maximum room and belongs in casual and sporting contexts.
Fabric changes how much fit tolerance you have. Neycko's garments are made from Italian techno jersey, a blend of 74% polyamide and 26% elastane. Most stretch garments contain between 2% and 5% elastane, so 26% is exceptionally high. That four-way stretch means the same garment accommodates a wider range of proportions than a rigid cloth would. Our guide to travel fabric explains the construction.
For advice per build, see our guide to clothing tips for men with different body types.
When should you have clothing altered?
Alterations are the most underrated solution for men who struggle to find a perfect size off the rack. A good tailor turns a well-fitting garment into a perfectly fitting one, usually for less than the cost of returning and reordering twice.
Straightforward and inexpensive alterations:
- Shortening or lengthening trousers. A standard job, typically in the range of ten to twenty euros in the Netherlands.
- Taking in or letting out a waistband, provided there is enough fabric in the seam allowance.
- Taking in the sides of a shirt for a closer silhouette.
- Shortening sleeves on shirts and jackets.
Expensive or impossible:
- Moving a shoulder seam. Too complex and too costly on most garments.
- Letting out beyond the available seam allowance. Not possible once the fabric runs out.
If a garment does not fit at the shoulder seam, it is the wrong size. Choose a different size rather than paying a tailor. The shoulder is the one fit characteristic that cannot be corrected without effectively rebuilding the garment.
What is the practical checklist for buying the right size?
Run through these five points on every purchase. Together they prevent almost every sizing mistake, and they take less time than processing a single return.
- Re-measure periodically. Bodies change. If it has been a year or more, measure again before ordering.
- Consult the brand's own size chart, not a generic one or the size you wore last time at a different label.
- Take the larger size when between two. Alterations can bring a garment down, never up.
- Check the shoulder width on anything structured. It is the most critical and least correctable measurement.
- Note your measurements somewhere you can find them, such as a note on your phone. Five minutes of measuring only pays off if you can retrieve the numbers when ordering.
Our list of the biggest annoyances in menswear is dominated by fit problems, and most of them start with buying a remembered size rather than a measured one.
Frequently asked questions
How do you determine your clothing size as a man?
Take six body measurements: chest, waist, hips, shoulder width, sleeve length and inseam. Use a flexible tape held horizontally and do not press it into the skin. Compare those numbers against the specific size chart of the brand you are buying. When you fall between two sizes, always take the larger one.
Why do sizes differ so much between brands?
Every brand uses its own fit block as the reference for its sizing. That means an L at one label can match the dimensions of an XL at another. Sizes are brand-specific guidelines rather than a universal standard. Consulting the size chart of the specific product is the only reliable approach.
Which measurement matters most for a shirt?
Chest circumference is the primary measurement for a shirt. Check shoulder width next: the shoulder seam should land precisely on the end of your shoulder bone. That is the only fit characteristic that cannot be altered. If the shoulder is wrong, the size is wrong regardless of how well the rest fits.
How do you convert European sizes to American or British sizes?
A European trouser size 48 corresponds to a waist of 83 to 87 cm, or an American W32. Size 50 is 88 to 92 cm, or W34. For jackets, the European number is roughly the American number plus ten, so EU 50 equals a US 40. Shirts use neck size in centimetres in Europe and collar size in inches elsewhere.
When should you have clothing altered?
Alter clothing when the main measurement is correct but the length or width at a specific point is not. Shortening trousers, taking in sides and adjusting sleeve length are simple and relatively cheap. Do not alter a jacket or shirt whose shoulder seam does not fit: that is a sizing problem, not an alteration problem.
Conclusion
Determining your clothing size is a five-minute investment that prevents years of bad purchases. Measure chest, waist, hips, shoulder width, sleeve length and inseam. Consult the size chart of the specific brand. Take the larger size when in doubt.
Fit matters as much as size. Two men with identical measurements but different proportions will experience the same garment differently, so learn which of the three fits suits your build and apply that knowledge on every purchase. For garment-specific sizing, see our guides to determining the perfect trouser size and determining your swim shorts size.
Discover the Neycko collection
At Neycko, fit is central to every design. Browse the trouser collection, the polo collection and the new-in collection. Every garment is made from Italian techno jersey with four-way stretch, which gives more fit tolerance than a rigid fabric. Read the full Dutch guide: kledingmaat bepalen heren: de complete gids met maattabellen.